-- Assembly tools auxiliary series->Screw Feeder Name:Precision Screw Feeder Type:NSB type Description: NSB TYPE Applicable screw size: from M1.0 to M3.0 Applicable screw length (under head): up to 20mm Standard screwdriver bit can be used Scooping chamber capacity: 80cc With protection and recovery circuit Supplied with a bit guide * The standard screwdriver bits and suction types can be used. * It copes with special screws (SW, PW and short neck length.) Other capabilities It is compact and space saving. With installation of Nejikura, the large stock of screws can be loaded. It is equipped with an overload backstop protection circuit. Introducing new bit guide This new bit guide leads the screwdriver bit to the center4 of the screw head. It will improve productivity. With a sliding adjuster, the bit size can be changed. It carries screws smoothly. Increased durability and long life is assured. The load on the motor is decreased and efficiency of the screw alignment is increased. The tilting angle of the rail is adjustable according to the screw size to be used. The amplitude is adjustable to suit the screw size to be used. The rolling of the rail is eliminated and the screws are carried smoothly. One Quicher can cope with eight different sizes of screws. The NS series cope with eight different sizes of screws just by replacing the rail (8 sizes from M1.0 to M3.0) Optional parts Easy to replace rail NSB It is easy to replace the rail to meet the change of screws. Exchange of NSB rail 4 Model Name & Number NSB Size 123(W) x 181(D) x 145(H) Weight (including rail) Approx. 2.92 Kg Power Source AC 100V, DC 12V 500mA, AC adapter Protection & Recovery Circuit Motor overload stop. Protection circuit for reverse power connection Applicable Screw From M1.0 to M3.0 (Refer right table for applicable rails) Applicable Screw Length (under head) Up to 20mm Scooping Chamber Capacity 80cc Accessories (in package) Instruction Manual Allen Wrench (L shaped, 2mm) AC adapter Passage Window (each of two types) 0.35mm Gauge Plate (to adjust holding plate) Screw Nominal Size M1.0 M1.2 M1.4 M1.7 M2.0 M2.3 M2.6 M3.0 Applicable Rail SR10 SR12 SR14 SR14 SR17 SR20 SR23 SR30 When you place an order, please specify the type number of the applicable rail. One Escaper comes with the rail. NS series can cope with the screw size from M1.0 to M3.0